To put the system into reprogramming mode; at the KSU:
- Set the switch, Program 2, to the ON position.
- Press the reset key
- Status indicator light on the KSU stops flashing
- Press the "star key (*)" at station 10
- Intercom light comes on
- System is now ready to be reprogrammed
Flexible Ringing by STATION and C.O. LINE:
Access code is 2xx (xx=station number 10-17)
- At this time dial 2 and the two digit station number (ex:211)
- Turn ON or OFF the C.O. Lines 1 through 3 to make the phone ring or not ring
- Do this for ALL The stations
- Once programming is completed the system can be put back into the operating mode as follows:
- At station 10 press the "#" key
- Now go to the KSU and turn the program 2 switch to the OFF position
- Hit the reset button
The System is now ready to use.
|
|
